image-asset (18).webp

4 Things to Keep in Mind When Installing a Stone Vanity

Bathroom Remodeling May 12
image-asset (18).webp

Unlike full natural stone kitchen countertop installation, adding natural stone vanities in a home can, in some cases, is something that a homeowner can take upon themselves. This is mostly due to the individual piece of a bathroom vanity being significantly smaller and weighing less than the huge pieces that make up the average kitchen. However, there are several cases of bathroom vanity installations that can potentially be subject to the sort of obstacles that need to be addressed by a professional installer. Here are a few things amateur installers should keep in mind about natural stone vanities.

What’s the Material Like?

Vanities that are ¾” thick and relatively small might seem a breeze to get into a bathroom, but it’s important for the installer to know how fragile the material is. Certain variations of marble, for instance, especially thin pieces of marble, can be split right in half if introduced to even a small amount of pressure.

How is the Sink Hole Configured?

All vanities come with their own specific sink hole configurations. In all cases, if the placement and size of the sink hole leaves only a small width of stone in front and in back of the hole, then the surrounding section is incredibly fragile and will need to be supported the entire time that it’s being carried into a home. It should be noted that, if the sink hole leaves 2” or less of stone on either side of it, it’s best to hire a natural stone installer to avoid the risk of the piece breaking during delivery.

Protect the Material During Installation

Once the piece is finally laid onto the vanity, it’s important to shelter it from the glue and tools that will be used during installation. Nearly all stone materials are unforgiving of metal scrapes over the surface, so it’s advised that installers refrain from laying their tools directly over the surface of the countertop.

Glue the Counter

Installers should be careful when angling the counter upward to be glued, as the material is still susceptible to snapping at this stage. Once the piece is angled, a few spots of silicone glue on the cabinet will hold it in place. If there are any gaps between the countertop and the surrounding walls or cabinets, caulking can be used to fill them in. 

Recent Posts

Remodeling any area of the home is a huge undertaking. However, planning and executing a kitchen remodel requires a great many decisions to be made, can take weeks, and has additional impact on a family...

image-asset (66).webp

Updating the cabinetry in your home is a significant investment, so you should take your time and carefully consider your options. You want your choices to not only reflect your own specific needs and preferences...



Home Solutions by Kurtis is a sister company to Kurtis Kitchen & Bath—a renowned, family-owned and -operated remodeling company that Canton...

image-asset (70).webp

Reviews

From start to finish Kurtis was a great company to work with. From the initial contact and design concept with Gregory Holster to the cabinet drop off team, the install team led by project manager Jeff Tuomi and the countertop company, the project was on time and all work was performed beyond expectations. This was greatly appreciated seeing as it was completed on December 23. All the people involved were professional and did an excellent job.

Ken M.

Shanna was our project consultant. Picking out cabinets along with counters can be somewhat overwhelming but her knowledge & experience helped us make the right decisions. Dylan & Juwan unloaded truck & Dylan check off ship ticket to make sure all boxes were accounted for. Courteous & pleasant to talk to…nice job of stacking everything neatly in our garage. We couldn't be more pleased with the service & so happy with our kitchen

Deborah D.

We recently worked with Lauren on cabinetry for a master bathroom renovation. She was great to work on the design and selections. Lauren was efficient and responsive from cabinet selection through ordering. Our overall installation was smooth. We had some unforeseen circumstances impacting our ability to accept delivery of our cabinets on the initial agreed upon date. Kurtis was very accommodating in rescheduling delivery given our project challenges. We couldn't be happier with our cabinets for this project.

Shannon O.

We had complete renovations to our kitchen and main bathroom. From start to finish, the design with Shanna was exactly what we asked for and Jeff stayed on top of the renovations, communicating each step of the way. Every worker was professional and the final product is elegant and functional. We were very happy with Kurtis and would choose Shanna and Jeff again.

Eileen M.

We love our new kitchen! Kurtis Kitchen & Bath did an outstanding job, and Adrian at the Clarkston location was exceptional to work with—creative, patient, and really listened to what we wanted. The project was well-organized, and we went from demo to a fully functioning kitchen in just 30 days. Highly recommend!

Carter C.
The Google "G" logo.
5.0
Rating
The logo for Houzz.
4.3
Rating
The logo for Angi.
4.3
Rating
The logo for the Better Business Bureau (BBB).
A+
Rating

Like your current kitchen layout but want a faster update?

Please visit our sister company, ReNewIt By Kurtis, to learn about cabinet refacing!

Kurtis Kitchen & Bath

Contact Us

An aerial view of the Kurtis Kitchen & Bath building.

Address
6665 Dixie Hwy
Clarkston, MI 48346
Get Directions
Hours

MON-THURS: 10AM – 5PM*
FRI: Closed
SAT: 10AM – 2PM
SUN: Closed
*Evenings by appointment only

Installation
(734) 338-8752

© 2026 Kurtis Kitchen & Bath. All Rights Reserved

For over 55 years, Kurtis Kitchen & Bath has been considered a leader in Michigan’s home remodeling industry.
When it comes to your project, whether you do it yourself, contract it out, or utilize our installation service – Kurtis is there from the start.