Types of Countertop Edges for Kitchen Remodels

Kitchen Remodeling May 23

The countertop is a widely used surface in the home, which is why during a remodel, a homeowner has to be keen on the material used. Another aspect that influences the functionality of the countertop is the design of the edges. The way they are shaped will affect the appearance of the entire surface and, consequently, the look of the kitchen. From straight cut lines to curved types, countertop edges match a host of kitchen remodeling ideas; one just has to know what is suitable where. Details are vital when deciding the style of a kitchen remodel, and the countertop edges are a few ways to set one cooking area apart from another.

Bullnose

A bullnose countertop edge can be full or half. The profile is round and smooth, which adds a soft touch to the countertop style. It is gentle when bumped into, making it ideal for a home with young children. The roundness means that when liquids spill on the surface, they don’t drip to the floor. Instead, they trickle to the front of the cabinet. A full bullnose will make a countertop edge look thinner than a half-nose.

Bevel

The corner is angular but only subtly with most standard edges sitting at about 45 degrees. Beveled edges are matched with contemporary kitchen remodeling ideas, but it is possible to customize it to suit the décor. There is also the choice of a double beveled edge, which is suitable for a wide countertop. Due to its angular style, a beveled edge allows spills to drip on the floor.

Mitered

The profile consists of two pieces that make the countertop appear thicker without the disadvantage of extra weight. A second frame is used to wrap the sides of the countertop. One downside is that it can be difficult to achieve pattern consistency between the two pieces.

Ogee

t is a concave-styled edge with ripples and coves to accentuate it. The curved lines give the profile a simple but formal look. Ogee countertop edges are more prone to chipping than other styles. A homeowner can also get the double ogee, which has two concave radiuses, adding to the elegance of the profile.

Square

quare edges are some of the standard choices for countertops because they complement all themes. The corners are not too sharp, thereby avoiding chipping and injuries; rather, they are designed with kerfs, which are small cuts to smooth the edges.

Triple Pencil

The profile is made up of three-quarter-inch radius domes that lie on top of each other. It results in a fancy edge that is suitable for marble and granite countertops. The prominent nature of the profile can, however, overpower the rest of the décor. Countertop edges should receive as much attention as the color, material, and quality factors when picking surfaces to match with specific kitchen remodeling ideas.